• 1GBit Ethernet
• 100 Mhz transmission frequency
• PoE Power over Ethernet support
• Cable length available: 100m/box, 305m/box, 500m/drum

SiweL CAT5e F/UTP installation cable is with 4x2x AWG23/1 design and reaches a transmission frequency up to 100 MHz. The cable is suitable for building structured cabling area. Compliant with the following standards ISO/IEC 11801.

Technical Details

• Physical properties:
• Conductor: Bare annealed copper, solid AWG 24/1
• Insulation: PE (Polyethylene)
• Total number of insulated conductors: 8, twisted in 4 pairs
• Color code: Blue-white, orange-white, green-white, brown-white
• Individual pair shielding: None
• Overall shielding: Foil shielded, drain wire
• Overall sheath: PVC
• Outer sheath diameter (nominal): 0.55 mm nominal
• Mechanical properties:
• Tensile loading: 150N max.
• Shipping- and storage temperature range: -20 °C up to +75 °C
• Operating temperature range: -20 °C up to +60 °C
• Installation temperature range: 0 °C up to +50 °C
• Overall diameter Simplex (nominal): 6.1 mm nominal
• Electrical properties:
• Impedance: 100±5 Ohm @ 1-100 MHz
• Capacitance: 40 pF/m nominal @ 800 Hz
• Capacitance unbalance (pair-ground): 1.5 pF/m max. @ 1 KHz
• Insulation resistance: 5 GOhm x km min.
• DC loop resistance: 147 Ohm/km max. (2% max. resistance unbalance)
• Voltage resistance: 72 Vdc max.
• Signal propagation delay: 535 nS/100 m max.
• Propagation delay: 20 nS/100 m max.
• NVP: 69%